Part #:
101.8001
Description:
Motor, 24V DC, 25mm, 0.8Nm
Power Rating:
24V DC - 0.6A (15V Battery)
Recommended Supply:
ABC-11-W or ABC-13-W
Torque:
0.8Nm
Speed:
28 rpm
Operating Temperature:
41 - 140° F
Max Channels to Pair:
32 Channels
Physical Weight:
5.29 ounces (0.3 lbs)
Part #:
102.2000
Description:
Motor, 120V AC, 40mm, 5Nm
Power Rating:
120V AC
Torque:
5Nm
Speed:
30 rpm
Max Operating Time:
4 min.
Operating Temperature:
41 - 140° F
Max Channels to Pair:
32 Channels
Physical Weight:
60 ounces (3.75 lbs)
Program Button
www.btxinc.com
Dallas, Texas - USA
1. Press the “Program” button on the
motor and the system will begin to
step back and forth.
2. Select the desired channel on the
handsender and press the “Program”
button on the back of the remote.
You need a pen or paper clip.
3. Continue to other program functions or exit program mode by pressing the
“Program” button on the motor. Once exited, the motor will stop stepping.
In order to program the motor, the system must first be connected to a power source.
Note:
2.4 GHz motors are initally programmed via a programming button located at the
head of the motor. Alternatively, you may enter programming mode via the
Single Select
feature, however, this only works if the intended motor is already learned to the remote
or the motor has not been learned to any remote (factory default).
Note:
It is possible to program multiple motors simultaneously by placing all intended
motors in program mode, then learning the handsender and channel.
Learning a Handsender/Channel
2.4 GHz Tubular Motor Programming
(Roller Shade & Gemini)
