www.btxinc.com
Dallas, Texas - USA
2.4 GHz Traversing Motor Programming
(Drapery & Panel)
Reverse Motor Direction
Toggle Momentary/Maintain Option
To Erase Handsender from Motor
1. If not already in program mode, press the “Program” button on the motor and the
system will begin to step back and forth.
2. Select the appropriate channel on the handsender.
3. Press and hold the “Left” and “Right” buttons on the remote simultaneously for
approximately 3 seconds. The system will stop stepping for a moment to confirm the
change is set, then will continue stepping. Continue programming or exit program
mode by pressing the “Program” button on the motor.
1. If not already in program mode, press the “Program” button on the motor and the
system will begin to step back and forth.
2. Press and hold the “Program” button on the motor for approximately 3-5 seconds. The
system will give a quick jog then continue stepping. Continue programming or exit
program mode by pressing the “Program” button on the motor.
1. If not already in program mode, press the “Program” button on the motor and the
system will begin to step back and forth.
2. Select the appropriate channel on the handsender.
3. Press the “Program” button on the back of the handsender. The system will stop
stepping for a moment to confirm the handsender is erased, then will continue
stepping. Continue programming or exit program mode by pressing the “Program”
button on the motor.
To Erase All Programming
1. If not already in program mode, press the “Program” button on the motor and the
system will begin to step back and forth.
2. Press and hold the “Program” button on the motor for approximately 15 seconds. The
system will give a long jog in one direction and stop. The motor will automatically exit
program mode.
