Speed Programming
SMART MATRIX MTC
2 - 40
SAVE
to save the set parameters and move to the
STYLE NAME
setting screen.
Set the speed name (
e.g..
MTC-4
)
operating as
described on paragraph - Navigation throughout the
Display Windows.
Once you have setup the speed name. If the set
name was already used for another style, the
warning “
DOUBLE STYLE NAME
!” appears
YES
to save the speed (
MTC-4
) to the database.
List of the speeds in the database (
included
MTC-4
)
.
To exit the function
SPEED EDIT
.
EXIT
to go back to main menu.
Speed Modify
The Style Modify function is basically identical to the Programming a New Speed function.
The main differences are the following:
1) once you have activated the
SPEED EDIT
window from Main menu, choose from the database the
speed you want to modify (
es.
MTC-4
) and press
MODIFY
Program all the steps described on Programming a New Speed
sequence, to bring all the desired changes with respect to the
reference speed
MTC-4
.
2) the bottom line of
STYLE NAME
screen that contains the style name setting keyboard shows the name
of the selected style, to be modified (
MTC-4
).
Summary of Contents for SMART MATRIX MTC
