BTS FREEEMG 300, User Manual

Page: 96 / 120

94
BTS Bioengineering
BTS FREEEMG
guide to the use of onboard software
General
Selecting “General”, the following screen will be visualized:
It is possible to set:
• The language
• “DHCP”, for automatic host configuration, the “IP address”
and “Netmask”, available only with the “DHCP” not checked,
to manually assign the connection parameters and the “Port
Number”.
• “Quite mode”: Checking this voice, the program will play
without any noise (instead of what normally happens when for
example you Tap on a button or activate an acquisition…)
• “Lock on Capture”: Checking this voice when an acquisition
starts the BTS FREEEMG 300 will be automatically locked
showing the “Unlock” button
• “Video off on Capture”: if checked, the display automatically
will switch-off at the acquisition beginning. To activate the
screen again a click on one of the PocketPC button is enough
• The use of a Secure Digital memory card to store the temp file
generated during the acquisition (check this voice only if there is
a Secure Digital board in the related port).