BTS FREEEMG 300 User Manual Download Page 102

Page: 102 / 120

100

BTS

Bioengineering

BTS

FREEEMG

guide to the use of onboard software

Instead the error message:

“ERROR: media not initialized”

will be visualized if the card has been inserted but hasn’t still been

initialized.

In this circumstance a button will appear allowing the initialization.

Once selected the “Media” it is possible operating on the second list-box

to select the database to use.

Mind that if the selected Media is empty, it is necessary to create

a new one.

To create a new database click on “New”.

The new database will be created with the default name “TrialsDB”.

To change the name select it and click on “Rename”.

To delete a database select it and click on “Delete”.

This operation removes completely the database and all its content

(patients, sessions and trials).

For this reason the system will ask a confirmation before proceeding

with the deletion.

“Exit” button

The “Exit” button allows the closing of the application and the visualization

Summary of Contents for FREEEMG 300
























































































































Search results

Summary of Contents for FREEEMG 300

Reviews:

Related manuals for FREEEMG 300

Brands by name

Popular brands

BTS FREEEMG 300, User Manual

Search results

Summary of Contents for FREEEMG 300

Reviews:

Related manuals for FREEEMG 300

Brands by name

Popular brands