BTS FREEEMG 300, User Manual

Page: 57 / 120

55
BTS Bioengineering
BTS FREEEMG
Initial screen
At the start-up of the BTS FREEEMG 300 you see the initial screen
comprised of six buttons: “Local”, “Remote”, “Download”, “Config”,
“Activate” and “Exit”.
In the lower right hand corner of the main screen there is the version num-
ber of the software installed on board.
“Active” button
The “Active” button allows only those probes to be activated which are
to be used during the acquisition and to assign each of these to a specific
channel.
Click on this button to call up the following display:
guide to the use of onboard software