32
BTS
Bioengineering
system components
DC adaptor to the mains and turn on the switch located on the rear panel.
When the Charger is properly connected to the mains and has been turned
on, the status LED “Power” will show a steady GREEN light.
The charging status of the EMG probes and of the FSW/EGN
probes is indicated by the respective status LED (see § “Wireless
EMG Probes” and “Wireless FSW/EGN Probes”).
Note that inserting the EMG probes into the Charger when it is
on, these come in “Deep Sleep” mode.
It is necessary to reactivate the probes, prior to use them, using a
magnet.
