BTL VANQUISH ME, Operator'S Manual

Page: 11 / 44

BTL VANQUISH ME - OPERATOR’S MANUAL I PAGE 11 OF 44
3 SAFETY PRECAUTIONS
3.1 MAINTENANCE
3.1.1 GENERAL MAINTENANCE
All maintenance and service must be carried out by BTL authorized technical personnel.
BTL bears no responsibility for repairs or service performed by personnel not directly trained by
the company.
Improper installation, operation or maintenance of this system may result in malfunctions of this
unit or other devices.
In case of display failure or other obvious defects, switch the unit off immediately by means of
the power switch, disconnect the power cord from the power outlet, and notify BTL authorized
service personnel.
Adjustment or replacement of components may result in the equipment failing to meet the
requirements for interference suppression.
If the system cannot be installed immediately after delivery, the unit and its external components
or accessory elements must be stored in their original packaging in a dry place.
Do not store or operate the unit in a dusty environment. Do not immerse it in any liquid. Do not
place it near running water. Avoid placing the device in direct sunlight.
Caution
Exterior cleaning of the device: Never use cleaning agents containing alcohol, ammonia,
petrol, thinners, etc. Never use abrasive cleaning materials, which will scratch the device
surfaces.
No parts of the device require sterilization. Care should be given to prevent water or other
liquids from getting inside the device.
Applicator cables, power cord and plug: Check for frays and kinks. Ensure that the insulation
is not damaged in any way.
Do not use damaged components and contact your BTL authorized service provider for
service. Always route electrical cords and cables away from staff or patient foot-traffic areas
where they could increase the chance of a tripping related accident.
All maintenance by the operator must only take place when the system is shut down and
disconnected from the power source.