6
MY HOME
Technical sheets - Automation
kwh
115.4
Total
D/M/Y
m
3
Kw
$
D
1
2
3
4
- Energy Management Mode – consumption display FUN=5
It is possible to display the consumptions and the production of several energies of the
system, with monitoring of up to a maximum of ten lines.
Warning: with physical configuration, only the consumptions of one line can be
displayed.
For each line, the consumptions and the instantaneous, daily, monthly, and annual
economic evaluation are displayed.
It will be possible to set two maximum consumption values, with the device emitting
visual and sound notifications if these are exceeded. In this case, the displayed value will
be green when below both limits, yellow when one has been exceeded, and red when
both have been exceeded.
Functions
Once the device has been configured, it will be possible to scroll through the various
lines using icon 4. For each measurement interface, by pressing briefly icon 3 it will then
be possible to display the consumptions or the economic evaluation.
Press and hold down icon 3 to access a submenu where it will be possible to change the
basic value of the economic evaluation.
Consumption and economic evaluations are themselves split into: instantaneous, daily
(D), monthly (M), annual (Y). It is possible to scroll through these settings using icon 1.
Press and release icon 2 to access a submenu that can be used to set the time, the date,
the threshold levels (if enabled), and the possibility of enabling or disabling the beep
emitted when the threshold is exceeded.
Legend
1. selection of display times
2. setting of the functions (time, date, max. power, etc.)
3. economic display of the consumptions
4. selection of the lines to display
ZA
Line address
0 – 9
ZB
Line address
1 – 9
MOD
Type
0 = ELECTRICITY
1 = WATER
2 = GAS
3 = DHW
4 = HEATING/COOLING
FUN
Function
5
BT00517-a-UK
HD4891 - HC4891 - HS4891
L4891 - N4891 - NT4891
