Technical sheets - Automation
MY HOME
3
NOTA (*): If M=0, source 1 is switched on without first switching OFF the sources
(follow-me mode).
RDS
ON
OFF
106.70
2
2
3
4
1
7
5
– Sound system control mode - FUN = 2
With this mode, for the associated amplifier the user can control the switching ON or OFF,
the volume, the cycling through the sources, and their management (where allowed).
Information on the currently active source is also displayed.
In this mode the parameters that can be configured are the local address of the display (which
must coincide with the A/Pf address, and the M1 mode of the associated amplifier), and the
name of the sources that can be controlled.
A
Room
0 – 9, amplifier room
PF
Loudspeaker
1 – 9, Amplifier loudspeaker
MOD
Mode
0 – 8, Source switching ON (*)
FUN
Function
2
Functions
A quick pressure of keys 5 and 7 will respectively switch ON and OFF the associated
amplifier. If the associated amplifier is on, an extended pressure of keys 5 and 7 may be
used to adjust the volume, the intensity of which will be displayed by means of an icon
5. A short pressure of keys 2 and 4, will respectively cycle through the sources installed
in the system, and launch a control for the currently activ
e sour
ce. If the associated
amplifier is off and no source is on, the screen
will not show any information. Press key 4 for 3 seconds to configure the alarm clock (see
the user manual for details).
Legend
1. Indication of the amplifier status or radio frequency
2. Cycling of sources (radio/aux)
3. Active source indication
4. Change radio station
5. Associated amplifier OFF and volume decrease
6. Volume level indication
7. Associated amplifier ON and volume increase
HD4891 - HC4891 - HS4891
L4891 - N4891 - NT4891
6
BT00517-a-UK
