Technical sheets - Automation
MY HOME
1
Configuration
Local Display may be configured in two ways:
- physical configuration, by connecting the configurators to the appropriate sockets.
This mode gives the possibility of configuring with basic parameters only 1
function to manage, among the ones listed below. For the configuration of the
advanced parameters use the TiLocalDisplay software.
- from the PC, using the dedicated TiLocalDisplay software. This mode gives the
possibility of configuring all the parameters, for the management of 1 to 4
functions listed below.
Funzioni gestibili
- Scenario control
- Temperature control with external probe 3457
- Temperature control with probe HD/HC/HS4693, L4693, N4693, NT4693.
- Sound system
- Consumption display
- Load management
- Advances scenarios (with MH200N programmer installed in the system), to be
configured using the software only
Legend
1. OLED technology Touch Screen
2. Configurator socket
3. BUS clamp
4. Clamp for the connection of the external temperature probe
5. USB connector
Front view
Description
Local Display is a device that gives the possibility of 4 home automation functions by
means of simple and intuitive icons displayed on a 1.2” OLED display with touch screen
technology.
It can be used to manage the temperature control, sound system, energy management,
and scenario functions.
The back of Local Display has a USB socket, which can be used to connect the device
to a PC, to update the configuration, the set of characters, and the icon, as well as the
firmware.
Technical data
- Power supply from BUS:
18 – 27 Vdc
- Stand-by Absorption:
max 10 mA @ 27 Vdc
max 15 mA @ 18 Vdc
- Operating absorption:
max 50 mA @ 27 Vdc
max 70 mA @ 18 Vdc
- Operating temperature:
5 – 35 °C
- Size:
2 flush mounted modules
1
Rear view
2
3
4
5
HD4891 - HC4891 - HS4891
L4891 - N4891 - NT4891
Local display
BT00517-a-UK
