6
ST-00000361-
31/07/2018
2
1
CLAK
3
25-35 c
m
40
cm
344642 - 344643
EN
EN
The main screen of the device shows the icons of the main functions configured.
The following tables describe the functions available:
The video handset offers the possibility to select among 16 types of bells with
programmed ringtones, which can be freely associated to the following type of calls:
Call from the entrance panel
(configured with S=0)
Call from the entrance panel
(configured with S=1)
Call from the entrance panel
(configured with S=2)
Call from the entrance panel
(configured with S=3)
Intercom call within the apartment
Intercom call outside the apartment
Floor call
Notification
The association of the type of ringtone to the event is performed using the dedicated
menu on the device.
Using the advanced configuration, the video handset gives the possibility of
programming up to:
50 generic activations
50 direct activations to the door locks
40 intercoms within the apartment
40 intercoms outside the apartment
50 direct auto-switching on to the EP
It is also possible to record, and/or enter, local NOTES, up to a maximum of:
Audio notes: 20
Text notes: 50
When this limit is reached, older notes will be replaced by new ones.
When preset using the appropriate configuration, the PROFESSIONAL STUDIO (OFFICE)
function appears on the menu and can be enabled/disabled with the Favorite key ( ) or
with the dedicated icon. With the function active, when a call is received from the entrance
panel, the video handset rings and the associated door lock is automatically activated,
without the need for pressing the door lock control key of the device.
PROFESSIONAL STUDIO (OFFICE) function
Main functions
This function notifies the status of the door lock. If open the "LED door lock" of the
handset flashes, and if closed, the LED stays off. WARNING: the function can only
be activated if required by the system - accessory devices are required. CANNOT BE
ACTIVATED together with the PROFESSIONAL STUDIO (OFFICE) function.
DOOR STATUS function
Icon
Function
Meaning
1
Answering machine
Touch to access the screen with one or
more audio/video messages to be heard.
1
Cameras
Touch to access the screen for the
activation of the cameras of the
system, and display the images
recorded by them.
1
Notes
Touch to access the screen used to write
or record a notes, or display and listen to
any notes present.
1
Intercom
Touch to access the screen used
communicated with other audio/video
internal units installed in your apartment
or in other apartments.
1
Activations
Touch to access the screen where it is
possible to enable certain actuators (e.g.
door locks, garden light, etc.).
1
Settings
Touch to access the screen where it is
possible to customise the functions, to
make the most of your device.
The inductive loop function enables the device to be used by people wearing hearing
aids with (T) selector. Switch the acoustic device to the T position. To ensure correct
magnetic coupling between the handset and the acoustic device, we recommend a
position in front of the device, at a distance of 25 – 35 cm.
NOTE
: the presence of metal and background noise generated by electric/electronic
devices (e.g. computer) may compromise the performance and the quality of the
coupling device.
INDUCTIVE LOOP use
This function, if preset by an appropriate configuration, can be used to send voice
messages using the microphone of the device through the speakers of the sound system.
The activation is preformed by clicking the dedicated icon on the display. The green LED
on, and the message on the display, indicate that the function is active. To DISABLE the
function press the ”Connection” key again.
PAGING function
CLASSE 300X13E
Touch Screen handsfree video internal units
with Wi-Fi
