25
Installation using Ceiling Mount Bracket (391696 model)
①
To pass cables to upside of ceiling, please make about
50~60mm hole on the ceiling panel and attach the
Ceiling mount bracket on it.
②
Assemble Terminal Cover to Ceiling Mount Bracket
with 3 screws. (
Do not use Rubber Gasket !)
Locate the summit of the Plate Spring at the arrow
mark. (For more information, refer to the “Terminal
Cover Assembling” section)
③
Connect “Drop Prevention Spring” to main body to
prevent camera from drop. Line up the mold lines and
turn main body on its axis in CW(Clockwise) direction
and assemble main body to Terminal Cover.
④
After assembling them, screw main body to Terminal
Cover to protect them from separation by vibration
and so on.
