7
MAX. 4 Patterns are programmable. This function is that the camera memorizes the path (mostly curve path) by the
joystick of the controller and revives the trajectory operated by the joystick as closely as possible.
MAX. 8 sets of Group are programmable. This function is that the camera memorizes the combination of Presets,
Pattern and/or Swings sequently and runs Presets, Pattern and/or Swings repetitively. A Group can be combined upto
20 functions with any of Preset/Pattern/Swing.
Privacy Masks are programmable, not to intrude on any other’s privacy :
391696/391716/391717 : 8 privacy zones
391695/391715 : 4 privacy zones
PTZ (Pan/Tilt/Zoom) Control
With the RS-485 communication connection, MAX. 255 units of cameras can be connected to a single controller.
Pelco-D or Pelco-P protocols can be selected as a control protocol in the current firmware version.
OSD (On Screen Display) Menu
OSD menu is provided to display the status of camera and to configure the functions interactively.
The information such as Camera ID, Pan/Tilt Angle, Direction, Alarm Input and Preset is displayed on screen.
Alarm In/Out Function
391696 : 4 alarm sensor inputs and 2 alarm output relays
391695/391715/391716/391717 : 3 alarm sensor inputs and 1 alarm sensor outputs
Alarm sensor input is decoupled with photo-couplers to avoid external electric noise and shock perfectly.
Both of N.O.(Normal Open) sensors and N.C.(Normal Close) sensors can be used and the signal range of the sensor
input is from DC 5.0V to 12.0V for various applications.
The camera can be set to move to a Preset position or to run functions such as Pattern, Swing and Group when there
are external sensor activations. Also “Post Alarm” function is possible, which is supposed to activate after user-defined
time period and sequentially in succession to the action by external sensor activations.
Reserved Presets (Hot Keys)
Most camera setup options can be set up easily and directly with the reserved presets (Hot Keys), without entering
into OSD menu. For more information, refer to “Reserved Presets(Hot Keys)” in this manual.
Perfect Outdoor Environment Compatibility and Easy Installation
391715/391716/391717 : The fans and heaters are built-in in the camera for cold and hot temperature environment.
Also idealistic mechanical design protects the camera from water and dust. (IP67 when installed properly with wall
mount bracket only)
It is easy to install the camera.