3
03/06/2019
ST-00000471-
1
2
16
1
2
16
1
2
16
1
3
2
2
2
344625
EN
Bell programming
Classe100 V16M Video internal unit
with handset
The video internal unit offers the possibility to select among 16 types of bells with programmed ringtones, which can be freely associated to the following type of calls:
- Calls from the entrance panel (configured with S=0);
- INTERCOM call;
- Floor call.
The general call bells coming from the EP configured with S=1, S=2 & S=3 are configured as default and cannot be changed.
Call bell selection
Note
: if no action is performed during call ringtone selection mode for more than 20”, the device returns to normal operating mode.
• Call bell selection from the main entrance panel (S=0)
• Floor call bell selection
• Intercom call bell selection
Replace the handset to confirm the
selection or wait for the ringtone to end to
avoid saving.
Lift the handset and wait at least 30”. The LED
will flash red to indicate that the device is in
programming mode.
When selecting the call ringtone, do not move the handset close to your ear.
> 30 seg.
