manualshive.com logo in svg

BTECH S5 BATTERY VALIDATION SYSTEM SCM-600, Operating Manual

Share
Download
BTECH S5 BATTERY VALIDATION SYSTEM SCM-600 Operating Manual Download Page 3

Installation Guide

3

Table of Contents

Product Overview .............................................................................5

Product Warranty..............................................................................6

A. Hardware Warranty.............................................................................................................. 6
B. Software Warranty............................................................................................................... 6
C. Entitlement During the Applicable Warranty Period ........................................................ 6

Installing the Software .....................................................................9

1. Install the BVM Software ..................................................................................................... 9
2. Activate the BVS Observer................................................................................................ 11
3. Installing Drivers for the USB Port on SCM-600 ............................................................. 12

Starting Up......................................................................................17

1. Make sure the BVS hardware is configured properly..................................................... 17
2. Make sure the SCM-600 is turned on and connected  .................................................... 19
3. Add the battery file(s) included on your BVM software CD ........................................... 20
4. Make sure the hardware is communicating with the software ...................................... 21
5. Ensure that settings and readings are correct................................................................ 28
6. Enable remote communication......................................................................................... 39

Adding Your Batteries to the System.............................................40

Creating a New Location File ................................................................................................ 40
Adding New Battery Location Files to the BVM Software.................................................. 45

Summary of Contents for S5 BATTERY VALIDATION SYSTEM SCM-600



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands