■
Click on
Exit
■
On exiting a Voyager DMP icon will appear on your desktop
Windows XP, 2000 or Me users should proceed as follows:
■
You may be asked to reboot your PC, if so please do so at this point.
■
Now plug in the USB pod using the USB cable into a free USB port on your PC.
■
The PC will now recognise new hardware and install the necessary drivers.
■
The red power LED should be lit on the USB pod.
Windows 98SE users proceed as follows:
■
Reboot your PC
■
Plug in the USB pod using the USB cable into a free USB port on your PC.
■
You will be prompted to insert your Windows 98SE system disc.
■
When installation complete reboot your PC again.
■
The red power LED should be lit on the USB pod.
2.2 Revert your PC sound settings back to sound card
During the installation the BT Voyager DMP was selected as the preferred audio device, however this plays all
your PC sounds through the BT Voyager DMP.
■
Select Settings then Control Panel from the Windows Start menu
■
Select Multimedia (in 98SE), Sounds and Multimedia (in ME, 2000) Sounds, Speech and Audio Devices then
Sounds and Audio Devices (XP)
■
Select the Audio tab