You can select the appropriate one and click
OK
. The information will now appear in the Media list. If this does
not happen you may have selected the wrong CD.
5.3.2 To Clear the Local Database
Once an Audio CD has been played and its Album and Track names found the information is saved and
displayed each time it is played with the DMP.
You can right click on the album and select
Clear Local Database
to clear the saved information.
5.4 Auxiliary Input
The DMP allows other devices use its speakers e.g. a portable MP3 player or CD player.
Select the Auxiliary Input mode by either clicking the Mode Select button, or press the Mode Select button on
the DMP, until AUXILIARY INPUT is shown on the LCD.
Use the phono cable supplied or any leads supplied with your portable device to connect to the Aux In sockets
on the back of your DMP. The BT Voyager DMP will now become the speakers for your portable device.
5.5 FM Radio
The FM mode gives you the flexibility to listen to any of your favourite terrestrial radio stations. You can only
tune the FM stations from the DMP.
To listen to FM radio either click on Mode Select, or press the Mode Select button on the DMP. FM and the
station frequency is shown on the LCD and FM MODE will be shown in the interface.
The DMP also has an aerial located behind the right hand speaker that can be extended to improve reception.
5.5.1 Tuning FM Radio Stations
On the DMP press and hold the Tune
or Tune
buttons to auto scan available radio stations. You can
also keep pressing the Tune
or Tune
to scan manually.
5.5.2 Setting FM Radio Presets
Once you have scanned and connected to the radio station of your choice you can press and hold a preset
button for a few seconds until the display shows PRESET STORED. The radio station is then stored for future
use. Please note you can only select 6 preset FM radio stations and the station stored as preset 1 will be used
in the FM Radio alarm mode, see 3.4