10
INST
ALLA
TION
6.
You will be informed that ‘Windows is now ready to install the best driver
for this device’. Click
Next
.
7.
Windows will inform you that ‘Windows has finished installing the software
that your new hardware device requires’.
Click
Finish
.
8.
The ‘
BT Speedway ISDN PCI Card’ screen will be shown (Figure 2).
9.
Now follow the instructions in Part E.
D
For Windows NT
1.
Make sure that you have administrator rights before starting installation.
2.
Switch on your PC, if you have not already done so, and Windows will
automatically detect the card you have just installed.
3.
Insert The Speedway PCI Card CD into the CD drive. If the CD does not
start automatically, then you can start the introduction manually by going
into NT Explorer (or using
Start
-
Run
menu) and then double-clicking on
the
intro.hlp
file in the root directory of the CD. This will show the ‘BT
Speedway ISDN PCI Welcome’ screen (Figure 3).
Figure 2