7
INST
ALLA
TION
2.
Insert the other end of the ISDN cable into your ISDN or BT Highway
socket.
3.
Switch PC on.
The physical installation of your Speedway ISDN PCI Card is now
complete.
3.3 Device Driver Installation
Depending on which version of Windows you determined earlier:
If you have
:
Windows 95 version A:
Complete Section 3.3,
Part
A
& Part
E
.
Windows 95 version B:
Complete Section 3.3,
Part
B
& Part
E
.
Windows 98:
Complete Section 3.3,
Part
C
&
Part
E
.
Windows NT:
Complete Section 3.3,
Part
D
& Part
E
.
A
For Windows 95 Version 4.00.950 or 4.00.950a
1.
Switch on your PC, if you have not already done so, and Windows will
automatically detect the card you have just installed.
2.
The ‘New Hardware Found’ screen will be displayed, announcing that it has
recognised the BT Speedway PCI card as a ‘PCI Network Controller’. If this
screen is not displayed, close down Windows, switch off your PC and check
that the card is physically installed correctly.
3.
Select ‘
Driver from the disk provided by hardware manufacturer
’, click
OK
.
4.
Your PC will display a prompt asking you to insert the manufacturer’s
installation disk. Place the BT Speedway PCI Card CD in your PC’s CD
drive.
5.
Click
Browse
, in the ‘Drives’ section and select your CD ROM drive letter.
Double-click on
Cardware
which will be shown in the ‘Folders’ section and
double-click on
Windows.95
. Click
OK
and click
OK
again on the following
screen.
6.
After the files are copied to your PC, the ‘BT Speedway ISDN PCI Card’
screen will be shown (Figure 2).