BT Revelation, Owner'S Handbook Manual

Page: 37 / 52

Using the Call Logging
Interface Module
If a Call Logging Interface Module is installed
a printer may then be connected to your BT
Revelation system.
The call logging feature allows you to record
incoming and outgoing calls made on the
system. Details are printed as the calls are
completed.
If you are connecting a printer to your BT
Revelation, it should be serial V24/RS232-C
and should meet the following specifications:
Speed 1200 BPS
Data
Parity
8 bits
None
Connections to a printer/PC which terminates
in a 9-pin connector are:
RX
pin 2, TX pin 3,
GND pin
5,
RTS pin
7,
CTS pin
8.
Call logging information -
enable/ disable
If a Call Logging Interface Module is
installed, you should enable call logging. This
feature enables call logging and allows you to
choose which print-out format you require.
No output (option 0) is programmed on
power-up.
• From the programming position, dial
70
followed by the system PIN. The
Systemphone shows
Di
a
1 admi
n
code.
•Dial the admin code
(99).
The Systemphone
shows 99 followed by the current option.
• Enter the call logging option you require:
- O
to cancel the call logging output
- 1
to print out all calls as they are
completed
- 2
to print all calls with the last two digits of
outgoing call numbers masked
- 3
to print only outgoing calls
- 4
to print only outgoing calls, with the last
two digits masked
Calls are printed out in the following format
as they are completed:
1 2 3 4 5 6 7 8
O/G 10112/95 12.00:01 00:00:30 LOl S21 S21 1234567
O/G 10/12/95 12.00:10 00:01:56 L02 S25 S25 567890
l/C 10/12/95 12.01:13 00:06:32 L03 S22 524.
The data shown in this print-out is:
Column Meaning
number
2
3
4
5
6
7
8
Incoming or Outgoing Call
Date (Day/Month/Year)
Start Time
Duration of the Call
Line used
Initiating Extension
Terminating Extension
Digits Entered (Outgoing Calls Only)
(maximum of
30)
35