SETTING
UP
7
Relate SMS User Guide ~ Issue 2 ~ 2nd Edition ~ 20th August ’03 ~ 5538
Setting up
Follow these steps to set up your Relate SMS ready for use.
Open the battery compartment on the back of your
telephone by pushing in the plastic clip and lifting off
the battery cover. Then insert the batteries as shown.
Replace the battery compartment cover.
Plan the location
Situate your Relate SMS close enough to the
telephone socket so that the line cord will reach.
Do not situate the product in the bathroom or other
humid areas.
Note
If you are replacing batteries you will need to remove
the desk mounting plinth (if attached) to gain access
to the battery compartment.
Note
When your batteries are close to becoming completely
flat,
will flash in the top left corner of the
display. If you do not replace the batteries they
will become totally discharged and your display
will not work.
1
Install the batteries
The display on your Relate SMS is powered by 4 x AA
batteries.
Make sure the phone is not plugged into the phone
socket.
