BT IMAGE 2000 User Manual Download Page 62

Page: 62 / 73

Paper jam

If a page of the document you are printing gets
stuck in the machine, display shows

PAPER JAM

Paper jammed in the paper feed area

Clearing a paper jam

Document jam

If a page of the document you are faxing,
copying or scanning gets stuck in the machine,
display shows

DOCUMENT JAM

•

Open the front cover by pressing the two
release buttons on either side of the
machine.

•

Pull the front panel forward.

•

Remove the jammed paper.

•

Shut the cover.

•

Push the paper load lever away from you to
open the sheet feeder and remove loose
sheets.

•

Pull out the jammed paper.

•

After removing the jammed paper, re-load
the sheet feeder. Hold the left paper guide
and move it to the right to match the width
of the paper.

•

Pull the paper load lever towards you to
close the sheet feeder.

Summary of Contents for IMAGE 2000










































































Search results

Summary of Contents for IMAGE 2000

Reviews:

Related manuals for IMAGE 2000

Brands by name

Popular brands

BT IMAGE 2000, User Manual

Search results

Summary of Contents for IMAGE 2000

Reviews:

Related manuals for IMAGE 2000

Brands by name

Popular brands