Connecting to a
switchboard
If you want to connect your Image 2000 to a
switchboard (also known as a PBX), you can
take advantage of its PBX mode. This allows
you to set the line access code under one
button and the machine will, if required,
automatically insert a pause after the access
code when dialling an outside number. You
may also need to change the dialling mode.
To set PBX mode
•
Press the
SET UP
button until the display
shows
USER SET UP
.
•
Press the
button. Display shows
SET
USER INFORMATION
.
•
Press the
©
button until the display shows
SET LINE PARAMETERS
.
•
Press the
button. Display shows
AUTO
ANSWER RESPONSE
.
•
Press the
©
button to display
DIRECT LINE
or
PBX
.
•
Press the
button.
•
Press the
©
button to display
PBX.
•
Press the
button. Display shows
SET
ACCESS CODE
. PBX mode is now set and you
can now enter a line access code if required.
You can also set the recall mode.
56
Additional features
If you stored your access code under the # or*
button, then, when you make a call, if the line
access button is the first button you press, the line
access code will be dialled. If you press the line
access button after another button, it will send its
normal signal.
SET UP
