Setting the speaker volume
Your Image 2000 has an built-in speaker that
enables you to monitor the progress of a fax or
phone call.
The speaker has three settings:
LOW
,
MEDIUM
,
HIGH
.
To set the volume
•
Press the
button.
•
Adjust the volume of the dial tone to
LOW
,
MEDIUM
or
HIGH
using the
§
or
©
buttons.
•
When the volume is set, press the
button.
•
Press
STOP
to return to standby, or dial a
number.
One-touch names and
numbers
You can store a name, fax and phone number
under each of the one-touch buttons.
To store one-touch names and numbers.
•
Press the
SET UP
button until the display
shows
ONE TOUCH SET UP
.
•
Press the
button. Display shows
ONE
TOUCH SET UP. SELECT ONE-TOUCH KEY
.
•
Press the
ONE-TOUCH
button you want.
Display shows the one-touch button number
and
ENTER NAME
. You can now enter a
name. If a name has been previously
entered, the display shows
EDIT NAME
.
(See page : To edit one-touch names and
numbers)
You can enter a name of up to 20 characters.
For example, to enter the name JOHN:
•
Press the
5
button until the display shows
J
•
Press the
6
button until the display shows
O
•
Press the
4
button until the display shows
H
•
Press the
6
button until the display shows
N
15
When you set your Image 2000 to
HIGH
or
LOW
,
the machine gives two beeps.
Use the
©
button to move forward through the
display. Use the
§
button to delete characters.
If you pause for more than one minute when
entering your ID, your Image 2000 will
automatically revert to standby and any changes you
have made will NOT be saved.
Using the telephone,
fax and copier
SET UP
STOP
STOP
