PaperJet 65 user guide – Edition 3 – 8.10.01
To send a fax
Place document face down in the document
feeder.
If necessary set the Contrast and
Resolution settings.
Use the keypad to dial the number you
want.
Press the
Start
button. The number is
dialled before your fax is scanned and sent.
When the fax has been sent, the display
shows
TX COMPLETED
to confirm a
successful transmission.
16
NOTE
If you make a mistake when entering a number,
press the
< >
buttons to move the cursor over the
digit and enter the correct digit. To delete the whole
number press the
Clear
button.
NOTE
All dialling is shown using
0-9
keypad. You can also
use one-touch or speed dialling if they are set.
To select the default resolution setting
Your machine is pre-set to STD resolution
for faxing and copying. You can change this
setting so that the resolution is
automatically set to FINE.
When the machine is in standby
Press until the display shows
FAX SET-UP
To display
DATE AND TIME
To display
VARIOUS SETTINGS
Press until the display shows
TX RESOL. STD
To switch between
FINE
and
STD
.
To confirm.
To return to standby.
To dial and hear the progress of your
fax call
Place document face down in the document
feeder.
If necessary set the Contrast and
Resolution settings.
Press the
Monitor
button. You hear the
dialling tone over the loudspeaker.
Use the keypad to dial the number you want.
When you hear the far end machine
respond press the
Start
button. Your fax is
scanned and sent.
When the fax has been sent, the display
shows
TX COMPLETED
to confirm a
successful transmission.
0-9
0-9
