Connection information
Connection information
Your Easicom 200 can be connected to most
modern switchboards.
If in doubt, your switch supplier or
maintainer should be able to offer help.
Advice on connection to BT switching
systems can be obtained by dialling BT
Free
fone 0800
800 152
.
If you are connecting your Easicom 200 to
a switchboard/PBX, you may need to dial a
number (e.g.
9
) in order to get an outside
line. This number can be programmed into
your Easicom 200. The directories are
stored within the cradle. So if you have a
cradle for work and one for home, you can
simply transport the organiser between
the two without having to re-programme all
the numbers.
36
Connecting to a
switchboard/PBX
Press buttons in order shown
The organiser must be placed on the
cradle while you follow these steps.
Select
SET UP
from the main menu.
Select
PBX SETTING
.
Display shows
If the organiser is not placed in the
cradle, the display shows
Highlight
ON
or
OFF
.
Press the
edit
button.
KEYPAD
Enter the code your switchboard
requires to get an outside line. Your
Easicom 200 allows up to four digits.
Press the
OK
button to save
or
or
esc
to cancel.
esc
OK
edit
P
–
Ä
Ä
To set the number for an outside line
PBX SETTING
NUMBER:
ON
OFF
PBX SETTING
PLACE IN CRADLE
TO ACCESS
OK
The organiser will lose this number if
there is a mains power failure and there
are no batteries in the cradle.
The organiser must be placed in the
cradle while you follow the steps below.