If you wish to wall mount your BT Diverse X10, follow
these instructions.
1. Switch the power adaptor off at the mains and remove
the adaptor plug from its socket.
2. Drill two holes 30mm deep using a 5.5mm drill, 75mm
apart to take the wall plugs.
3. Put wall plugs into the drill holes and then insert both
screws.
Leave 2–3mm between the screw head and the wall.
You are now able to mount the base to the wall.
4. Hang the base onto the two screws. If necessary, tighten
or loosen the screws for the best fit.
5. Put the handset back in the base and reconnect the
power at the wall socket.
81
Wall mounting
BT Diverse X10 – Issue 2 – Edition 02 – 29.10.03 – 5737
IMPORTANT
Make sure that you are not drilling
into any hidden wiring and check
that the power cable will reach
from the mains socket to the base.
5737 Diverse X10 UG [Iss2-1] 5/3/04 10:34 am Page 81
All manuals and user guides at all-guides.com
all-guides.com
