Diverse Repeater ~ 4th Edition ~ 25th April ’01 ~ 3831
9
Registration:
•
The Repeater power must be
turned off.
•
Press and hold the
PAGE
button on
the telephone base station until the
base station is in registration mode
(please refer to the user guide for
the telephone).
•
Connect the power to the Repeater
and switch on.
•
The green LED on the Repeater
will flash, after a short while the
LED will remain on permanently
indicating that the registration is
complete.
Before attempting to register the
Repeater to the base station, make sure:
•
At least one handset is registered to
the base station.
•
Base station and handset are
powered up and in idle state.
•
Repeater power adaptor is connected
to the Repeater and the mains
socket – but switched OFF at the
wall socket.
Preparing your handset
Press the following buttons:
For an Executive handset
•
Press the
INT
button.
•
Press the
SET
button.
•
Press the
4
button.
•
Press the
7
button.
•
Press the
OK
button.
•
Enter the 4-digit PIN code (default
is
0000
)
•
Press the
OK
button.
•
Press the
1
button.
•
Press the
OK
button.
For a Classic handset
•
Press the
SET
button.
•
Press the
4
button.
•
Press the
7
button.
•
Press the
OK
button.
•
Enter the 4-digit PIN code (default
is
0000
)
•
Press the
OK
button.
•
Press the
1
button.
•
Press the
OK
button.
Registration:
•
The Repeater power must be
turned off.
•
Press and hold the
PAGE
button on
the telephone base station until the
base station is in registration mode
(please refer to the user guide of
the telephone).
•
Connect the power to the Repeater
and switch on.
•
The green LED on the Repeater
will flash, after a short while the
LED will remain on permanently
indicating that the registration is
complete.
To register the Repeater to a
Diverse 3010,3010 Micro and
3016