Add and register a headset to a BT Cordless Headset H55
42
You cannot de-register the
headset(s) if another headset
registered to the base is in use.
Even if the battery is
completely run down, you can
still de-register the headset
following the steps opposite.
De-registering headsets
You may need to de-register your headsets if
you wish to register your headset to a different
headset base. Or, if you have two registered
headsets and need to replace one of them. You
must first de-register both headsets, and then
register each headset you wish to use again, one
at a time.
De-register all headsets from the headset base
Please read the instructions through carefully
before beginning the de-registration process.
1. Press and hold down the Pair button on the
headset base until the Mute light on the headset
base turns on and starts to flash (at least 10
seconds), then release the Pair button.
2. Immediately, press and release the Pair button
again. You must press the Pair button while the
Mute light is still flashing. (The light flashes for
about seven seconds. If the light stops flashing, you
will need to start the process again from Step 1.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
