4
Quick set-up guide
Where to put your
headset base
• Make sure it’s at least a
metre away from other
electrical appliances to
avoid interference.
• Don’t place in a bathroom
or other humid area or near
excessive heat sources,
moisture, low temperatures
or dust sources.
• Don’t place near noise
sources such as a window
with traffic outside,
motors, microwave ovens,
refrigerators or fluorescent
lighting.
• The product works by
sending radio signals
between the base and the
headset. The strength of the
signal depends on where you
position the base. Putting it
as high as possible can help
give you the best signal.
IMPORTANT
Don’t try to make calls until
the headset battery is fully
charged.
1
Plug in
1. Plug the mains power
adaptor into the
socket marked
Power on the back
of the base.
2. Plug the other end
into the wall power
socket and switch on.
1
2
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
