BT BT7600 Quick Setup And User Manual Download

Page: 14 / 90

If you need some help, call us on

0800 218 2182*

or go to

bt.com/producthelp

Getting to know your phone

Handset buttons

Left option button

In idle mode, press to enter the main menu.

Also use to access sub menus and confirm options shown on the display above the button.

Up/Volume

From home screen, press to change the ringer volume.

In talk mode, press to increase the incoming speech volume, see page 23.

In menu mode, press to scroll up through the options.

Contacts

In idle mode, press to access your stored Contacts.

Talk/Handsfree

In idle mode, press to make and receive calls, see page 21.

In talk mode, press to switch handsfree on and off, see page 23.

Calls/Down

From home screen, press to open and scroll through the Calls list, see page 37.

In talk mode, press to decrease the incoming speech volume.

In menu mode, press to scroll down through the options.

1 (Speed dial)

From home screen, press and hold to dial BT 1571

or your stored speed dial number, see page 35.

Press and hold to turn the handset ringer on or off.

Menu

Calls

8:00pm

Summary of Contents for BT7600



























































































Search results

Summary of Contents for BT7600

Reviews:

Related manuals for BT7600

Brands by name

Popular brands

BT BT7600, Quick Setup And User Manual

Search results

Summary of Contents for BT7600

Reviews:

Related manuals for BT7600

Brands by name

Popular brands