BT BT7600 Quick Setup And User Manual Download | Manualshive

Page: 79 / 90

background image

If you need some help, call us on

0800 218 2182*

or go to

bt.com/producthelp

Help

79

No display

• The batteries may be flat, dead or incorrectly inserted.
• Recharge or replace the batteries.

Range icon flashes

•  Make sure the handset is registered to the base, see page 74.
•  Check that the mains power is correctly connected to the base.
•  Check that the handset is within range of the base.
•  If the batteries are low, place the handset on the base/charger to recharge.

You hear the busy tone when you press

• Make sure the handset is in range of the base.
• Another handset registered to your BT7600 base may be on the line and

Auto Join is switched off, please see page 58.

Answering machine doesn’t record any messages

• The memory may be full. Play and delete old messages, pages 47-48 and 50-51.

Answering machine messages have the wrong date and time

• Have you set the date and time? See page 62.

Can’t access your messages from another phone

• Have you changed the remote access PIN? See page 52-53.

Always keep a note of the new PIN in a safe place.

• Has Remote access been turned off? To turn remote access on, see page 53.

«
...
77
78
79
80
81
...
»

Summary of Contents for BT7600



























































































Reviews:

No comments

Related manuals for BT7600

Brand: Aastra Pages: 2

Brand: Aastra Pages: 2

Brand: Aastra Pages: 2

Brand: Aastra Pages: 2

Dialog 4106 Basic

Brand: Aastra Pages: 2

Brand: EastLink Pages: 28

Brand: Aastra Pages: 461

Brand: Aastra Pages: 40

Brand: Aastra Pages: 47

Brand: Aastra Pages: 47

Brand: Jabra Pages: 2

Brand: AT&T Pages: 116

Brand: Paradyne Pages: 17

Brand: Yealink Pages: 2

CONVERSip Edge 300

Brand: Vertical Pages: 48

Brand: MagicBox Pages: 44

Brand: Gigaset Pages: 28

Brand: DAC Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands