50
If you experience any problems, please call the Helpline on 0800 145 6789* or email [email protected]
Symbols
Emoticons
Do you have two text phone bases connected to
the same phone line?
If you have two text phone base stations plugged
into one line, you are likely to experience
problems receiving text messages. Normally, only
one SMS enabled base unit (DECT or cordless) can
be plugged into any line.
If you do want to use two base units and still
receive written text you must delete receive
service centre number from one of the base
stations. To do this on your BT Synergy, see page
54. This will allow you to send text via either
base station but texts will only be received on the
product with the active receive centre number.
If the base unit with the active receive centre
number is a DECT product then all handsets
registered to it will be able to receive text
messages.
Total number of messages
Your BT Synergy can store up to a total of 50
short messages across all handset Outboxes,
Drafts boxes and Inboxes.
Memory full alert
If the text mailboxes are full when you attempt to
write a new message the display shows
memorY
fUll
Delete
messages
for 2 seconds. You
must delete messages before you can write and
send a new one.
Text messaging
senD
is highlighted
Press
select
to send the message.
Enter the phone number or press
Search to open the phonebook
then scroll to the number you want
and press
select
. Now press
senD
.
Or scroll
or
to:
save
Press
select
to save the message in
the Drafts folder.
insert
sYmBol
Press
select
. The symbol table is displayed.
Press
or
to highlight the symbol you
want then press
insert
.
insert
emoticon
Press
select
. The Emoticon table is displayed.
Press
or
to highlight the Emoticon
you want then press Insert.
insert
temPlate
Press
select
. The list of templates is displayed.
Press
or
to highlight the Template you
want then press
insert
.
4. When sending a message, the display shows
senDing
message
then
message
sent
.
Standard text entry
With standard text entry you can enter a word by pressing each letter button a
number of times to display the character you want on the screen. For example,
to write the word “Hello”, press
twice,
twice,
three times,
three
times and
three times.
Receiving and reading text messages
When you receive a new text message, the icon is displayed along with
YoU
Have
x
new
messages
.
