BT Airway User Manual Download Page 30

Page: 30 / 125

Press to select. You now have 90 seconds to register the new
handset.

At the phone/fax machine connected to the Airway phone
socket:

Dial .

Enter the system password. (Original password =

0000

Hang up the phone or wait for the fax machine to hang up
automatically.

The light on the Phone Socket will stop flashing once the
Socket is registered to the Controller. The Phone Socket is
now ready to use.

The first phone socket installed will be assigned the
extension number 50, the second will be 51 and so on.

All Airway handsets registered to the Controller will now
display the Phone Socket and its extension number under
Internal on the Main Menu.

PWR

0000

Sel

Note

To make an internal call, dial the 2-digit extension number you want
to call.

To make an external call, dial

followed by the telephone number

you want to call.

SETTING UP

Summary of Contents for Airway






























































































































Search results

Summary of Contents for Airway

Reviews:

Related manuals for Airway

Brands by name

Popular brands

BT Airway, User Manual

Search results

Summary of Contents for Airway

Reviews:

Related manuals for Airway

Brands by name

Popular brands