BT Airway User Manual Download Page 61

Page: 61 / 125

Connecting to
a computer

Using Data Sockets, you can connect up to four PCs to your Airway
system.

You can change the settings of your telephone system from an
attached PC, and access the Internet through the Controller.

When you have two or more PCs connected, your Airway system
can act as a computer network in order to share resources between
your PCs.

Each PC you want to add to your Airway system must be installed
separately.

Note

This guide assumes that you have a basic user’s understanding of
PCs and MS Windows.

Serial Cable

Airway Data Socket

Before you start

Make sure you have the following items from your Airway Starter
Pack:

Data Socket mains
power adaptor

Airway CD-ROM

You may also need your original Windows 95, 98 or NT disks.

OMPUTER

Summary of Contents for Airway






























































































































Search results

Summary of Contents for Airway

Reviews:

Related manuals for Airway

Brands by name

Popular brands

BT Airway, User Manual

Search results

Summary of Contents for Airway

Reviews:

Related manuals for Airway

Brands by name

Popular brands