BT603 Users Manual
④
Press
to assign a MAC address to the tester. For more information, see Section 6.2.
⑤
Assigned addresses.
⑥
Press
to return the previous screen.
⑦
Press
to start the next step, Collecting Network Information. (See Section 11.5)
⑧
Press
to start PING test. (See Section 11.4)
⑨
After setting the information, then press
to move to the next screen.
11.3.
Link
Blink
This function helps you determine which cable is connected to which port on a network hub or switch. This function generates a link pulse
of frequency of 1 second to blink the port’s activity LED.
The function does not work with non-negotiating hubs or with ports that use signal timing outside of typical timing parameters.
①
Figure 28 Link Blink Function
①
Press
or
to go back to the previous menu.
35
