BT603 Users Manual
11. Network
Analysis
This test provides the network information based on the TCP/IP on the logical level. It consists of three steps:
(1) inspecting whether the port is active,
(2) assigning an IP address to the tester and
(3) collecting the network information of the devices connected to the network.
11.1.
Inspecting Activity of the Port
Figure 24 is displayed if the port is active.
①
④
⑤
②
③
Figure 24 When the Port is Active
①
Advertised speed and duplex that are supported by a network device when connected to the tester.
10: 10 Mbps,
100: 100 Mbps
HDX: half-duplex,
FDX: full-duplex
②
Actual speed and duplex.
③
Three options are available for the next step. To select the item, use to highlight the item.
DHCP: The addresses are assigned by DHCP servers. (See Section 11.2.1)
31
