Soundweb 3088 Installation Guide
4
Power
illuminated = indicates that the power supply is functioning.
Rear Panel Details
Audio & Control connectors
3088 audio and control connections are via Klippon (also known as BL, Phoenix or
Combicon) pluggable terminal block connectors.
12 x 6-way female Klippon connectors are supplied for making these connections.
For audio and network cables and looms, see the Product Overview catalogue from:
Direct Cable Systems Ltd.
Tel: (020) 7485 0899 www.directcable.co.uk
Neutricon-Neutricon tour grade network cable. P/N 1 50001
Phoenix-XLR audio cable P/N 1 00521
Audio & AES/EBU Input and Output wiring convention
Soundweb products provide cable shielding back from the destination to eliminate
ground loop problems. Therefore, the shield (S) connection on an input is grounded,
whereas the shield connection on an output is floating (although connected via an
internal network to ground for EMC compliance).
Balanced
wiring - The convention for balanced wiring (2-core plus shield) is:
Balanced connection
3088 connection
Pin 3 : Cold -
Pin 2 : Hot +
Pin 1 : Shield
This wiring can also be applied to the AES digital interface card.
Unbalanced
wiring (analogue audio only) - The convention for unbalanced wiring to the
inputs (1-core plus shield) is:
Unbalanced connection
3088 connection
Pin 1 : Shield
Pin 2 : Hot +
Pin 3 : Link to Pin 1 (Optional for 3088 inputs)