BSS Audio Prosys PS-8810, User Manual

Page: 104 / 121

- 104 -
PS-8810
DIGITAL SIGNAL PROCESSOR
These inputs are digital (high or low) only. The inputs are current
driven and will accept voltages up to +25VDC. They switch at
approxi1VDC. They can be used to control one or more
objects within the BSS PS-8810. The Pin State Indicator shows
the actual status of the hardware input as it comes into the rear
panel connector.
When the Edit button is pressed on a Digital Input, the Control
Port Assignment Dialogue box appears to assist in setup of the
input.
The Controls buttons allow filtering of the objects to allow only
certain objects to be displayed. The Named window allows
input of text to narrow the search. Once the desired object has
been found, highlighting and pressing of the Add button adds it
to the object list on the bottom of the window. By highlighting a
particular object in the bottom window, the attributes of the
object can be edited. Binary objects can be chosen on a
particular digital input level, while multiple choice objects can
be given specific choices.
Set Object(s)
Allows a single input to control up to fifty objects within the BSS
PS-8810. Binary objects can be controlled with normal or
Control Port Digital Inputs (DIN 1-8)
1
b
c d
e
f
Digital Inputs