BSR Whac-a-Mole, Owner'S Manual

Page: 76 / 83

Bob's Space Racers
®
Whac-A-Mole
®
Arcade Games
N
BSR AIR COMPRESSOR WIRING
1. Local electrical wiring codes differ in each area. The source wiring, plug, and
protector must be rated for the amperage and voltage indicated on the motor
nameplate. They must, also, meet all electrical codes for your area and meet the
minimum indicated on the motor nameplate.
2. Use a Type T fuse (slow-blow), or a circuit breaker.
CAUTION: Overheating, short circuits, and fire damage will result from inadequate
wiring, et cetera.
Note: 115V 15amp units can be operated on a 115V 15amp circuit under the
conditions:
i. No other electrical appliances, or lights, are connected to the same
branch circuit.
ii. Voltage supply is normal.
iii. Extension cords are of the minimum gauge specified in this
instruction manual.
iv. The circuit is equipped with a 15amp circuit breaker or a 15amp
slow-blow fuse.
3. If the above conditions cannot be met, or if nuisance tripping of current protection
device occurs, it may be necessary to operate the BSR Air Compressor from a 115V
20amp circuit.