BSR Whac-a-Mole, Owner'S Manual

Page: 78 / 83

Bob's Space Racers
®
Whac-A-Mole
®
Arcade Games
P
TROUBLESHOOTING BSR AIR COMPRESSORS
(CONTINUED)
PROBLEMS/CAUSES
Compressor Won t Start
Pressure switch
Circuit breaker
Thermal breaker on air compressor
Needle valve
SUGGESTED FIX
See Compressor Runs Continuously on
previous page.
Check the breaker box (fuse box) or
individual fuse for a blown breaker/fuse.
Correct the problem.
This is a push button switch on the back of
the electric motor that turns on the air
compressor. Simply push in the button to
reset the motor. (Some motors are painted
and have the switch painted as well.) In
order to push in this button, if it is painted
over, use the butt side of a screwdriver
handle and rap the button fairly hard to get it
to reset.
If the needle valve doesn t remove the back
air pressure properly, then the motor won t
be able to turn over the compressor, and this
may cause smoke! If the needle valve is the
problem, then treat it the same as if the
problem was an air leakage and the cause
was the Needle Valve (While Running). See
previous page for instructions.