BSR Whac-a-Mole, Owner'S Manual

Page: 27 / 83

Bob's Space Racers
®
Whac-A-Mole
®
Arcade Games
13
GENERAL MAINTENANCE INFORMATION
Your pride is reflected by the cleanliness and flash. A good game with good flash will make
money. The very best game, if not clean or properly flashed, will be easily passed by.
Remember, no one can enjoy the game until they have played it. Proper maintenance is
extremely important for good game operation and profitable stock averages.
Clean all Laminated surfaces daily (see chart below).
TO CLEAN GAMES
You may use soapy water on Formica, Plexi-glass, regular glass, Stainless Steel, and other
metals without causing any damage. The following list of cleaners can only be used on the
materials they are listed with. If a cleaner is used on a material that it is not listed with it will
cause damage to that material and Bob's Space Racers
®
will not be held responsible for repair
and/or replacement of that damaged material.
Cleaner Material
Lacquer Thinner Formica; regular glass
Mineral Spirits Formica; Plexi-glass; Stainless Steel; other metals
Clean-On-The-Go Glass Formica; regular glass; Stainless Steel; other metals
and Hard Surface Cleaner
TM
De-Solve-It
®
Formica; Plexi-glass
Brillianize
TM
Plexi-glass; regular glass
Windex
®
regular glass
3812S Enamel Reducer Plexi-glass
Soft Scrub
®
; CLR
®
; Lime Away
®
Stainless Steel; other metals
Old English
®
Oil; Baby Oil Formica; Stainless Steel; other metals
AIR PRESSURE ADJUSTMENT
The air pressure coming from the tank and into the game needs to be regulated air. The air
which goes into the game should be regulated by a pressure gauge. You can adjust this pressure
by the pressure regulator knob. The air pressure needs to be the minimum possible. Adjust the
pressure down so the heads barely come up. Keep adjusting the pressure up so the heads come
up a little higher each time. The maximum pressure should be when all the heads reach their
fullest extent; this will vary depending on each game unit. If you need assistance, please call,
Bob s Space Racers at 386-677-0761, and ask for a technician.