RAPID CONFIGURATION
7
1
STEP 4 – X-PRESS™ CONFIGURATION
X-PRESS™ is the intuitive Human Machine Interface designed to improve ease of
installation and maintenance.
Status and diagnostic information are clearly presented by means of the five colored LEDs,
whereas the single push button gives immediate access to the following relevant functions:
AutoSetup
to self-optimize and auto-configure
reading performance in demanding applications
AutoLearn
to self-detect and auto-configure for
reading unknown barcodes (by type and length)
Focus Lock
to memorize the mechanical focus
position
Test Mode
with bar graph visualization to check
static reading performance
The colors and meaning of the five LEDs are illustrated in the following table:
LED Color
Description
READY Green
This LED indicates the device is ready to operate. For Subzero
models this LED blinks during the warm-up phase.
GOOD Green
This LED confirms successful reading.
TRIGGER Yellow This LED indicates the status of the reading phase. *
COM Yellow
This LED indicates active communication on main serial port. **
STATUS Red This LED indicates a NO READ result.
* In On-Line mode the TRIGGER LED corresponds to the active reading phase signaled by the Presence Sensor.
In Automatic and Continuous modes the TRIGGER LED is always on indicating that the reader is ready to read a
code.
** When connected to a Fieldbus network through the CBX500, the COM LED is always active, even in the
absence of data transmission, because of polling activity on the Fieldbus network.
During the reader startup (reset or restart phase), all the LEDs blink for one second.
On the back of the reader near the cable, the “POWER ON” LED indicates the laser scanner
is correctly powered.
NOTE
When entering the X-PRESS™ interface on the DS4800-X1XX the
Oscillating Mirror remains in the default
fixed position
(0°) in order to make
barcode reading easier while performing the X-PRESS™ functions.
