RAPID CONFIGURATION
1
1
1 RAPID
CONFIGURATION
NOTE
This chapter illustrates a Stand Alone application. For other types of
installations, such as ID-NET™, Fieldbus, Pass-Through, Multiplexer
Layout, etc., refer to chapters 4, 5 and 6. For complete scanner
configuration using the Genius™ configuration program, refer to the
Context-Sensitive Help On-Line.
STEP 1 – CONNECT THE SYSTEM
To connect the system in a Stand Alone configuration, you need the hardware indicated in
Figure 1.
In this layout the data is transmitted to the Host on the main serial interface.
In Local Echo communication mode, the RS232 auxiliary interface can be used to transmit
data independently from the main interface selection.
When On-Line Operating mode is used, the scanner is activated by an External Trigger
(photoelectric sensor) when the object enters its reading zone.
Figure 1 – DS4800 in Stand Alone Layout
Figure 2 – DS4800 OM in Stand Alone Layout
DS4800
Host
PG 6000
P.S.
*
* Presence Sensor
(for On-Line mode)
CBX100/500
I/O, AUX
MAIN
DS4800 OM
Host
PG 6000
P.S.
*
* Presence Sensor
(for On-Line mode)
CBX100/500
I/O, AUX
MAIN
