Design and function
2016-03-10 / DIS 184_58300000140186_ara_en_k
Copyright by BSH Hausgeräte GmbH
Page 39 of 181
For hot air:
•
-
Accuracy: The appliance switches back to the operating mode from which
the rapid heat-up function was started before the temperature reaches its
target value
-
Peak heat: As for hot air, this may be slightly higher for temperatures
<150 °C
-
Heating element: Top heat outer circuit ~90 % plus ring heating element
•
Special features and characteristics:
-
Temporary operating mode, not independent
For conventional operating modes:
•
-
Accuracy: The appliance switches back to the operating mode from which
the rapid heat-up function was started before the temperature reaches its
target value
-
Peak heat: As for conventional operation modes, this may be slightly higher
for temperatures <150 °C
-
Heating element: Bottom heating and ring heating element
•
Special features and characteristics:
-
Temporary operating mode, not independent
-
On reaching 75 % of the selected target temperature the appliance
switches from settings 1 to settings 2 (type of element control and
circulated air motor)
3.14.11 CoolStart
•
-
Accuracy: ±10 K
-
Peak heat: Considerable temperature overshoot < 20 K - 30 K
-
Heating element: Bottom heating and ring heating element, subsequently
ring heating element
•
Special features and characteristics:
-
On reaching 90 % of the selected target temperature the appliance
switches from settings 1 to settings 2 (type of element control and
circulated air motor)