Test
2017-03-23 / DIS 184_58300000197442_ARA_EN_A
Copyright by BSH Hausgeräte GmbH
Page 52 of 101
14. When the test has completed automatically, remove LED 23 from the K138.X25
contact.
15. Plug LED E24 (centre) directly onto the K138.X25 contact.
16. Set up the test program – component test – oven light
K24
.
Result:
LED lights up.
If both LEDs light up, and you cannot find any fault in the cable or the
distributor board, then the left-hand LED is defective.
17. Terminate the test program – component test – oven light.
18. Remove LED 24 from the K138.X25 contact.
19. Connect the plug from E23 to the U2 distributor (U2.X93).
20. Connect the plug from E24 to the U2 distributor (U2.X92).
