Eshop:
Email:
w
w
w
.e
M
A
R
eg
.c
z
5
automatically selects measurement function of DCV or ACV, based on their input
levels via the test leads. The input also provides a low ramp
up impedance (LoZ) to drain
ghost voltages*.
n a signal above the voltage threshold of 1V DC or AC up to the rated 1000V is
present, the meter displays the voltage value in appropriate DC or AC, whichever larger in
peak magnitude.
Note:
*
Ghostvoltages are unwanted stray signal s coupled from adjacent
hard signals, which confuse common multimeter voltage measurements. The
mode
provides low (ramp up) input impedance (approx. 2.1
voltages leaving mainly hard signal values on meter readings. It is an invaluable feature for
precise indication of hard signals, such as distinguishing between hot and open wires (to
ground) in electrical installation applications.
*Only
,
pushbutton features are available in AutoV mode.
