Brush Bandit 2900T, Operating & Parts Manual

Page: 55 / 94

Bandit
Copyright 1/07 PAGE 51
MODEL 2900T UPPER FRAME COMPONENTS
NOTE:
Nuts, bolts, washers, and all other components
can be ordered by physical description.
LOCATION PART NUMBER DESCRIPTION
1. 989-100082 Cutter Wheel Guard
2. 989-100062 Upper Frame Assembly
3 a. 989-100097 Hydrostatic Motor Mount
b. 900-4912-51 Jack-Screw Adjuster - 5/8”-18NF x 6 1/2” Hex Head Bolt (Not Shown)
c. 900-4907-06 5/8”-18NF Nut
4. 989-300497 Hydrostatic Motor Mount Pivot Assembly
5. 900-1912-81 Split Bushing - 3/4” ID x 1” OD x 2”
6. 900-1908-37 Split Bushing - 1 1/2” ID x 1 3/4” OD
7. 900-1909-26 Split Bushing - 1” ID x 1 1/4” OD
8. 989-100066 Pivot Assembly
9. 900-4907-44 Lock Pin
10 a. 989-200022 Top Pin For Cutter Lift Cylinder (Start 5/06)
b. 989-300551 Top Pin For Cutter Lift Cylinder (Pre 5/06)
c. 900-4908-49 Snap Ring (Pre 5/06) (Not Shown)
11. 989-200001 Swing Pivot Pin
12. 989-300982 Cutter Lift Pivot Pin
13 a. 989-200023 Bottom Pin For Cutter Lift Cylinder (Start 5/06)
b. 989-300520 Bottom Pin For Cutter Lift Cylinder (Pre 5/06)
c. 900-4908-49 Snap Ring (Pre 5/06) (Not Shown)
14. 989-200002 Beltshield Back
15. 989-300540 Beltshield Clean-Out Hinge
16. 989-200003 Beltshield Clean-Out
17. 989-200004 Beltshield Cover
18. 900-1911-03 Sprocket
19. 900-1911-36 Bushing
20.
900-1910-92 Poly Chain Belt
21. 900-3935-08 Pin For Swing Cylinder (Not Shown)
22 a. 900-4906-37 5/16”-18NC x 1” Bolt For Cutter Lift Cylinder Pins (Not Shown)
b. 900-4906-48 5/16” Washer (Not Shown)