Brush Bandit 2900T, Operating & Parts Manual

Page: 43 / 94

Bandit
Copyright 1/07 PAGE 39
MODEL 2900T
BEFORE ATTEMPTING ANY TYPE OF MAINTENANCE DISENGAGE CLUTCH, TURN OFF ENGINE,
WAIT FOR THE CUTTER WHEEL TO COME TO A COMPLETE STOP, INSTALL THE CUTTER
WHEEL LOCK PIN, DISCONNECT BATTERY, AND MAKE SURE THE IGNITION KEY IS IN YOUR
POSSESSION.
HYDRAULIC SECTION
NOTE:
When returning hydraulic components for warranty make sure to box up all warranted parts to avoid
additional damage while shipping. Do not disassemble any hydraulic components which are to be warranted.
Anything which has been disassembled or tampered with will not be warranted. Items being returned must be
clean. All hydraulic components must have all hosing ports plugged. Failure to plug ports will allow debris to
enter components which will void warranty.
CORRECTING HYDRAULIC PROBLEMS
COMPONENT PROCEDURE
Checking for
1. Do not attempt to check your hydraulic pump without first consulting your
defective pump local dealer or Bandit Industries.
Checking for
1. If everything checks out as correct, it may be time to check the
defective motor hydraulic motor.
2. Do not attempt to check your hydraulic pump without first consulting your
local dealer or Bandit Industries.